home *** CD-ROM | disk | FTP | other *** search
- Path: newsfeed.tip.net!usenet
- From: ludde@dalnet.se (Mikael Ludwigsson)
- Newsgroups: comp.sys.amiga.hardware
- Subject: CD ROM problem
- Date: 2 Apr 96 18:04:41 GMT
- Organization: Uniplus Internet Access
- Message-ID: <1387.6666T1205T2911@dalnet.se>
- NNTP-Posting-Host: flash.dalnet.se
- X-Newsreader: THOR 2.22 (Amiga;TCP/IP)
-
- I have some problem to get my CD Rom player ( Mitsumi FX400) to work.
- I think the pinouts was the same in 2.5" and 3.5". The differents are at the
- size of the connectors. And there are more pins on the 2.5".
- When I switch on the computer I will not get it booting. If I disconnect the
- CD ROM it boot normaly. I found a small jumper on the HD ( a CONNER drive ) and
- it is on the "master" pins. The CD ROM have 3 positions for the jumper:
- Cable select
- Slave ( in use )
- Master
-
- Please help!!
-
-
- 2.5" HD
- ___________________________
- | |
- |HD pins viewed from back |
- |_________________________|
- ...................... ..
- ........... .......... ..
- \
- \
- \
- Where are pin number 1 ?
- |
- |
- | ..
- |_ I ..
- n ..
- t ..
- e ..
- r ..
- n ..
- a ..
- l .. Pins placed on
- ..
- I .. A1200 motherboard
- D ..
- E ..
- ..
- p ..
- i ..
- n ..
- s ..
- ..
- ..
- ..
- ..
-
-
- CD-ROM pins viewed from back
- DC Input
-
- 39 1 __________
- . . . . . . . . . . . . . . . . . . . . / \
- . . . . . . . . . . . . . . . . . . . | 5 0 0 12 |
- 40 2 |__________|
-
-
- <sb>ludde@dalnet.se
-
-